抽屜式框架斷路器橋型觸頭的關鍵技術研究
潘璇，李軍，陳大江，王忠
（南京大全電氣研究院有限公司，江蘇 南京 211100）
摘 要：橋型觸頭是抽屜式斷路器的重要部件，研究了橋型觸頭的操作力及動、熱穩定性，通過簡化彈簧片為等強度梁以及對工作狀態進行力學分析，得出正壓力和插入力的計算公式及關系，并通過試驗中正壓力與拔出力的測試得到經驗?zāi)Σ料禂?shù)。利用導電觸橋模型描述U 型排與橋型觸頭之間的接觸情形，計算二者之間的洛倫茲力、霍姆力、接觸電阻及溫升，得出校驗其動穩定性與熱穩定性的理論計算方法，為橋型觸頭的設計提供了思路。
關鍵詞：橋型觸頭；插入力；動穩定性；熱穩定性
中圖分類號：TM561 文獻標識碼：A 文章編號：1007-3175(2017)03-0038-04
Key Technique Research of Bridge-Type Contact in Withdrawable Air Circuit Breaker
PAN Xuan, LI Jun, CHEN Da-jiang, WANG Zhong
（Nanjing Daqo Electrical Institute Co., Ltd, Nanjing 2111 00, China）
Abstract: The bridge-type contact is the important part of withdrawable air circuit breaker. This paper researched the operating force, dynamic stability and thermal stability of bridge-type contacts. The spring plate was simplified as the constant strength girder and the mechanical analysis was carried out for working condition to obtain the computational formulas and relationship between forward force and inserting force. The experienced friction coefficient was got by testing forward force and extraction force. The contact situation between U-type busbar and bridgetype contact was described by using the conductive contact bridge model. This paper calculated Lorentz force, Holm force, contact resistance and temperature rise between both of them and obtained the theoretical calculation method to examine its dynamic stability and thermal stability, which provides the design thought for the bridge-type contact.
Key words: bridge-type contact; insertion force; dynamic stability; thermal stability
參考文獻
[1] 李保定，崔靜，劉進偉. 低壓抽屜式開關柜主回路接插件的可靠性[J]. 電工文摘，2011(3)：66-72.
[2] 萬祥軍. 抽屜式萬能斷路器母排倒角形式對搖手柄操作力的影響[J]. 低壓電器，2011(6)：10-12.
[3] 成大先. 機械設計手冊第3 卷[K].5 版. 北京：化學工業出版社，2008.
[4] 陸儉國，何瑞華，陳德桂，等. 中國電氣工程大典. 第11卷. 配電工程[M].北京：中國電力出版社，2009.
[5] 劉文娟，季慧玉，柳德金. 抽屜式斷路器抽屜座的主要技術分析[J]. 低壓電器，2011(9)：14-16.
[6] 管瑞良，顧建青，劉洪武. 基于有限元分析的框架斷路器觸頭系統短路耐受能力校核[C]// 中國電工技術學會低壓電器專業委員會第十三屆學術年會論文集，2007.
[7] 夏天偉，丁明道. 電器學[M]. 北京：機械工業出版社，2011.
